Tutorgum
Try a Class

Year 12 Chemistry tutoring.
Small groups. Online.

Small-group online classes.
Exam-style homework, with step by step solutions.
1-to-1 tutor support.

Bob’s Year 10 selfie in his school uniform
50th in
James Ruse Science
Bob in Year 12 wearing his James Ruse school jacket
1st in
Ruse Physics

Physics state rank99.85 ATARUSYD Med

Physics, Chemistry & Maths
HSC tutoring.

Watch 10 min demo

Chemistry student success

Full storyFull story
Full storyFull story
View results

The story behind tutorgum.

Before topping James Ruse Physics, I didn’t even want to tell my mum my marks.

Bob’s Year 10 selfie in his school uniform
50th in
James Ruse Science
Bob in Year 12 wearing his James Ruse school jacket
1st in
Ruse Physics

Physics state rank99.85 ATARUSYD Med

Skip story

But before I topped James Ruse Physics,I didn’t even want to tell my mum my marks.

But before I topped James Ruse Physics,
I didn’t even want to tell my mum my marks.

This was me in Year 10.

Ouch.

But there was something I was even worse at than taking selfies.

Science.

Cause, I hadn’t been doing so well.

Fuck.
50th in the cohort.

I hated science.

I studied. I memorised. I practised.

Yet I still used the wrong formulas.
I had to guess in exams.

I could never crack the top ranks or get 90%+.

I had lost control.

I didn’t want to tell my mum my marks.

So I knew something had to change.

I went on to achieve

  1. 1st in Ruse Physics.
  2. Physics state rank.
  3. 99.85 ATAR.
  4. USYD Med.

Explained intuitively and from scratch

Cl⁻Na⁺Na⁺Na⁺Cl⁻Cl⁻Cl⁻Cl⁻Na⁺Cl⁻Na⁺Na⁺Cl⁻Cl⁻Na⁺Cl⁻Na⁺Cl⁻Na⁺Cl⁻Cl⁻Cl⁻Na⁺Cl⁻Cl⁻Cl⁻Na⁺Na⁺Na⁺Cl⁻Cl⁻Cl⁻Na⁺Cl⁻Na⁺Na⁺Na⁺Cl⁻Na⁺Cl⁻Na⁺Na⁺Cl⁻Cl⁻Na⁺Cl⁻Cl⁻Na⁺Cl⁻Na⁺Cl⁻Na⁺Na⁺Na⁺Cl⁻Cl⁻Na⁺Na⁺Cl⁻Na⁺Na⁺Na⁺Cl⁻Na⁺Bright green = radioactive chloride; green tint = added crystal

Start with saturated salt water at a constant temperature.

Green marks the radioactive tracer salt

Add tracer salt. Bright green marks its radioactive chloride ions.

Green marks the radioactive tracer salt

The pile stays. The amount of dissolved salt stays the same too.

This cornerThe green surface itself is made of ions

Let’s zoom into one crystal in the pile.

Thousands of tiny ions. Keep zooming into the same face.

Its surface is a lattice of Na⁺ and Cl⁻ ions.

Cl⁻Na⁺Cl⁻Na⁺Na⁺Cl⁻Na⁺Cl⁻Cl⁻Na⁺Cl⁻Na⁺Na⁺Cl⁻Na⁺Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Bright green = radioactive chloride; green tint = added crystal

Watch the bright-green chloride ions at the surface.

Cl⁻Na⁺Cl⁻Na⁺Na⁺Cl⁻Na⁺Cl⁻Cl⁻Na⁺Cl⁻Na⁺Na⁺Na⁺Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Bright green = radioactive chloride; green tint = added crystal

Tagged ions leave. Ordinary ions join. Both happen at the same average rate.

Cl⁻Na⁺Cl⁻Na⁺Na⁺Cl⁻Na⁺Cl⁻Na⁺Na⁺Na⁺Na⁺Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Bright green = radioactive chloride; green tint = added crystal

Tagged chloride is now in the water, making the solution radioactive.

Cl⁻Na⁺Cl⁻Na⁺Na⁺Cl⁻Na⁺Cl⁻Na⁺Na⁺Na⁺Na⁺Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Cl⁻Bright green = radioactive chloride; green tint = added crystal

The amounts stay the same, but ions keep exchanging. That’s dynamic equilibrium.

2.Exam-style homework

You know how in school
you learn

CCHHHHHH

But then, in the exam,
you get
But then, in the exam, you get

OOOO−

What if you got questions like this in your homework every week?

A man begins to titrate 65.7mL of 0.270M acetic acid against 0.350M Ba(OH)2. Acetic acid has a pKa of 4.76. Draw the pH graph, ensuring you label the following points:

  1. The initial pH (2 marks)
  2. The pH at equivalence point (3 marks)
  3. The pH at the optimal buffer point (2 marks)
  4. The pH after 50mL of Ba(OH)2 has been added (2 marks)

And every question had step-by-step worked solutions.

Expand allShow less

a) The initial pH (2 marks)

ANSWER

Step 1: Thinking

Acetic acid is a weak acid and its dissociation in water can be represented as below:

Handwritten dissociation equation: CH₃COOH(aq) + H₂O(l) ⇌ CH₃COO⁻(aq) + H₃O⁺(aq).
Step 2: Draw up ICE table
Handwritten ICE table in mol/L. Acetic acid: initially 0.27, change −x, equilibrium 0.27 − x. Acetate and hydronium: initially zero, change +x, equilibrium x. Water is omitted from the concentration calculation.
Step 3: Substitute into the Ka expression
Kₐ equals [CH₃COO⁻][H₃O⁺] divided by [CH₃COOH].
Substitute the ICE values to obtain x² divided by 0.27 − x.

The acid dissociation constant, Ka, can be calculated from the pKa value:

10 to the power −4.76 equals x² divided by 0.27 − x.

Make the small change assumption

Approximate 1.74 × 10⁻⁵ by x² divided by 0.27. This gives x about 0.0021 M and an initial pH of about 2.66.

b) The pH at equivalence point (3 marks)

ANSWER

Step 1: Thinking

At the equivalence point, all of the acetic acid has reacted with the NaOH to form its conjugate base, acetate ion (CH3COO–). This is why there is a pH at equivalence point!

To determine the pH, we need to consider the hydrolysis of acetate ion in water:

Handwritten acetate hydrolysis equation: CH₃COO⁻(aq) + H₂O(l) ⇌ CH₃COOH(aq) + OH⁻(aq).

The equilibrium constant for this reaction is given by:

Handwritten calculation: Kᵦ = K𝓌 ÷ Kₐ = (1.0 × 10⁻¹⁴) ÷ (1.74 × 10⁻⁵) = 5.75 × 10⁻¹⁰.
Step 2: Draw ICE table

An ICE table can be used to determine the concentration of OH– ions in the solution at equilibrium:

Blank handwritten ICE table for acetate hydrolysis, with columns for acetate, water, acetic acid and hydroxide. The water column is crossed out.

Hm but we don’t know what the concentration of CH3COO– is at equivalence point! Let’s go calculate it first.

Step 3: Calculate concentration of acetate ion at the equivalence point

At the equivalence point, all of the acetic acid has reacted with the NaOH to form its conjugate base, acetate ion (CH3COO–).

The number of moles of acetic acid initially present is (0.270M)(0.0657L) = 0.0177 moles. To find the concentration we need to know the volume at the end point.

The handwritten working uses the one-to-two mole ratio: half the initial moles of acetic acid gives 0.00887 mol of Ba(OH)₂ at equivalence.
The handwritten working uses n = cV and c = 0.350 M to find that the equivalence volume is 25.3 mL.

The volume of the solution at the equivalence point is 65.7mL + 25.3mL = 91mL, so the concentration of acetate ion at the equivalence point is (0.0177 moles)/(0.091L) = 0.1944M.

Step 4: Sub into ICE table
Completed handwritten ICE table. Acetate starts at 0.1944 M, changes by −x′, and ends at 0.1944 − x′. Acetic acid and hydroxide both start at zero, increase by x′, and end at x′. Water is excluded.
Step 4: Substitute into the Kb expression gives:
Kb=[CH3COOH][OH−][CH3COO−]{K}_{b}=\frac{[C{H}_{3}COOH][O{H}^{-}]}{[C{H}_{3}CO{O}^{-}]}
=x′20.1944−x′=\frac{x{'}^{2}}{0.1944-{x}^{'}}
=x′20.1944=\frac{x{'}^{2}}{0.1944}
5.75×10−10=x′20.19445.75\times {10}^{-10}=\frac{x{'}^{2}}{0.1944}

x’ ≈ 10.57 × 10-6

which is the concentration of OH– ions in the solution. The pOH of the solution at equivalence point is therefore:

pOH=−log⁡[OH−]=−log⁡(10.57×10−6)≈4.976pOH=-\log [O{H}^{-}]=-\log (10.57\times {10}^{-6})\approx 4.976

and its pH is:

pH=14−pOH≈9.02pH=14-pOH\approx 9.02

c) The pH at the optimal buffer point (2 marks)

ANSWER

We need to realise that the optimal buffer point is when there is equimolar acid and conjugate base.

This will occur at halfway to the equivalence point.

To understand this, consider you had 1 mole of CH3COOH.

After you add in 0.5 moles of OH- (or in this case, 0.25 moles of Ba(OH)2) you will have 0.5 moles of CH3COO- and also 0.5 moles of CH3COOH left. Thus, you have equimolar amounts of acid and conjugate base.

Thus, it will be at 0.5 x 25.3mL = 12.65mL

The pH will be:

Ka=[CH3COO−][H3O+][CH3COOH]Ka=\frac{[C{H}_{3}CO{O}^{-}][{H}_{3}{O}^{+}]}{[C{H}_{3}COOH]}
=[CH3COO−][H3O+][CH3COOH]=\frac{\cancel{[C{H}_{3}CO{O}^{-}]}[{H}_{3}{O}^{+}]}{\cancel{[C{H}_{3}COOH]}}
Ka=[H3O+]Ka=[{H}_{3}{O}^{+}]
1.74×10−5=[H3O+]1.74\times {10}^{-5}=[{H}_{3}{O}^{+}]
pH=4.76pH=4.76

d) The pH after 50mL of Ba(OH)2 has been added (2 marks)

ANSWER

This is about double the equivalence point volume.

Getting to equivalence takes 25.3mL

Thus you add another 24.7 mL of Ba(OH)2.

This just adds pure OH-

Handwritten working finds 0.00865 mol of excess Ba(OH)₂, doubles it to obtain 0.01729 mol of hydroxide, and divides by the total volume of 115.7 mL to obtain 0.149 M.
Handwritten result: pOH is 0.826, so pH is 14 − 0.826 = 13.17.
Original hand-drawn titration curve. The red curve rises gradually through the buffer region, climbs steeply near equivalence, then levels out. The horizontal axis shows the volume of barium hydroxide added in millilitres. The original sketch accompanies the source calculations.

And don’t worry,
there’s plenty more where that came from.

3.1-to-1 support

Ask questions any time - inclass, afterclass or between classes! Contact your tutor anytime.

We don’t offer separate 1–1 tutoring.

Bob Chen
3rdChemistry · James Ruse
Eunice Huang
95%Chemistry · North Sydney Girls

Wait, so what does a week at Tutorgum actually look like?

The lesson ends. The learning keeps going.

Mon
Tue
Wed
Thu
Fri
Sat
Sun
Class7–9pm
HomeworkTry exam-style questions with worked solutions to help you through.
Tutor supportAsk when a question comes up. You do not have to wait for the next class.
Find your class

Monday 7–9pm

01 / 06
  1. Quiz

  2. Review

  3. Theory

  4. Questions

  5. Theory

  6. Questions

Show school termsHide school terms
Classes continue through school holidaysChristmas / New Year: 2-week break
Module 5: Equilibrium and Acid ReactionsEquilibrium, solubility and precipitation — weekly outlineAfter Week 3: Christmas / New Year break2 weeks offClasses resume: this module continuesSummer holidays — classes continue in holidays

Weeks start at 1 for each module.

  1. Week 1
    Reversible reactions

    Introduce chemical reversibility and prepare for the Year 12 approach to study and practice.

  2. Week 2
    Dynamic equilibrium

    Explain reversible reactions in closed systems and relate equal forward and reverse rates to observations.

  3. Week 3
    Equilibrium shifts and collision theory

    Use the Haber reaction and collision theory to explain how equilibrium responds to changes.

  4. After Week 3: Christmas / New Year break2 weeks off
  5. Summer holidays — classes continue in holidays
  6. Week 4
    Le Chatelier's principle

    Predict responses to disturbances and interpret concentration-time graphs.

  7. Week 5
    Equilibrium constants

    Build an understanding of equilibrium expressions and use the equilibrium constant in calculations.

  8. Week 6
    Dilution and equilibrium calculations

    Examine the effect of water and other disturbances and distinguish concentration changes from changes in the equilibrium constant.

  9. Week 7
    Dissolution and intermolecular forces

    Explain solubility by comparing interactions within solutes, solvents and solutions.

  10. Week 8
    Solubility equilibria

    Introduce the solubility product and connect precipitation to a dynamic equilibrium.

  11. Week 9
    Harder solubility and equilibrium questions

    Practise molar-solubility and common-ion calculations and revisit equilibrium reasoning.

Module 6: Acid/Base ReactionsAcids, bases, titrations and buffers — weekly outlineTerm 2 holidays — classes continue in holidays

Weeks start at 1 for each module.

  1. Week 1
    Acids and bases

    Introduce acid and base definitions and compare their observable properties.

  2. Week 2
    Neutralisation and acid-base theories

    Explore uses and calorimetry of neutralisation and trace the development of acid-base definitions.

  3. Week 3
    Brønsted-Lowry theory

    Explain proton transfer, hydronium and conjugate acid-base pairs.

  4. Week 4
    Amphiprotic species and salt acidity

    Compare proton donation and acceptance and explain acid-base behaviour of oxides and ions.

  5. Week 5
    pH calculations

    Calculate pH from hydrogen-ion concentration and handle logarithms and significant figures.

  6. Week 6
    Acid and base equilibrium constants

    Use Ka, Kb, pKa and pKb and connect them to acid-base equilibria.

  7. Week 7
    Titrations and equilibrium practice

    Revisit acid-base calculations and introduce titration reasoning and concentration determination.

  8. Week 8
    Titration technique and standard solutions

    Choose appropriate standards and explain how glassware preparation affects titration results.

  9. Term 2 holidays — classes continue in holidays
  10. Week 9
    Buffers

    Explain buffer action, natural buffers and responses to added acid or base.

  11. Week 10
    Titration and conductivity curves

    Interpret buffer regions, polyprotic titration features and conductometric reactions.

  12. Week 11
    Acid-base exam practice

    Apply the module's ideas in exam-style questions.

Module 7: Organic ChemistryOrganic families, synthesis and polymers — weekly outlineTerm 3 holidays — classes continue in holidays

Weeks start at 1 for each module.

  1. Week 1
    Organic molecules and naming

    Introduce carbon chemistry, hydrocarbons, functional groups and naming conventions.

  2. Week 2
    Functional groups and molecular shapes

    Name compounds across functional groups and connect hydrocarbon structures to three-dimensional geometry.

  3. Week 3
    Organic properties and their implications

    Compare alcohols and alkanes using bonding and intermolecular forces, then consider social and ethical issues.

  4. Week 4
    Alkane and alkene reactions

    Write and compare combustion and other characteristic hydrocarbon reactions.

  5. Week 5
    Alcohols

    Classify alcohols and connect their structures to physical and chemical properties.

  6. Week 6
    Alcohol oxidation and related compounds

    Analyse alcohol redox reactions and bioethanol, then examine carboxylic acids and amines.

  7. Week 7
    Esters and amides

    Explain esterification, biodiesel production and the formation of amides.

  8. Week 8
    Soaps, detergents and polymerisation

    Connect fats to cleaning agents and introduce addition polymerisation.

  9. Week 9
    Addition polymers

    Compare the structures, properties and uses of polymers including polyethylene, PVC and PTFE.

  10. Week 10
    Condensation polymers

    Explain polyester and polyamide formation and consolidate organic reaction pathways.

  11. Term 3 holidays — classes continue in holidays
  12. Week 11
    Organic Chemistry exam practice

    Apply organic structures, properties and reaction knowledge to exam-style questions.

Module 8: Applying Chemical IdeasChemical tests and instrumental analysis — weekly outline

Weeks start at 1 for each module.

  1. Week 1
    Monitoring chemicals and identifying ions

    Explain why chemical monitoring matters and use flame and precipitation tests.

  2. Week 2
    Complex ions and quantitative analysis

    Explore complex formation, gravimetric analysis and precipitation titrations.

  3. Week 3
    Absorption and spectrophotometry

    Compare colourimetry, ultraviolet-visible measurements and atomic absorption spectroscopy.

  4. Week 4
    Atomic absorption and functional-group tests

    Explain atomic absorption and select chemical tests for organic functional groups.

  5. Week 5
    Mass spectrometry

    Explain ionisation and fragmentation and use mass spectra to investigate molecular structure.

  6. Week 6
    Carbon-13 NMR

    Connect nuclear shielding, chemical shift and carbon environments to NMR signals.

  7. Week 7
    Proton NMR

    Interpret hydrogen environments, chemical shifts and integration in proton spectra.

  8. Week 8
    Infrared spectroscopy

    Connect bond vibrations to infrared absorption and interpret spectra to identify structures.

  9. Week 9
    Chemical synthesis case studies

    Compare synthesis pathways using reagent availability, conditions, yield, purity and wider impacts.

Trials preparationModule review and trial exam practice — weekly outlineTerm 4 holidays — classes continue in holidays

Weeks start at 1 for each module.

  1. Week 1
    Equilibrium revision

    Revisit Module 5 theory and practise questions selected around areas needing revision.

  2. Week 2
    Acid-base revision

    Practise theory comparisons, conjugate pairs, salt acidity, pH and titration reasoning.

  3. Term 4 holidays — classes continue in holidays
  4. Week 3
    Organic Chemistry revision

    Review boiling-point trends, reaction pathways, esters, soaps and polymer questions.

  5. Week 4
    Chemical analysis revision

    Practise flame tests, complexes, absorption measurements and structure determination.

  6. Week 5
    Trial mock paper 1

    Apply acid-base, stoichiometric, energetic and organic ideas across a mixed paper.

  7. Week 6
    Trial mock paper 2

    Practise equilibrium, calibration, organic analysis and conductivity questions.

  8. Week 7
    Trial mock paper 3

    Review complexes, scientific skills, enthalpy and organic properties through a further mock paper.

HSC exam preparationInferred from the C10 codes: a possible final seven-week paper and exam-technique block; sequence needs owner confirmation. — weekly outline

Weeks start at 1 for each module.

  1. Week 1
    Solubility-product exam consolidation

    Practise precipitation, molar-solubility and common-ion calculations alongside related energetics questions.

  2. Week 2
    Acid-base exam consolidation

    Compare theory limitations and practise conjugate-pair and buffer calculations.

  3. Week 3
    Organic reaction exam consolidation

    Revisit alcohol energetics and build reaction flowcharts for alcohols and hydrocarbons.

  4. Week 4
    Chemical analysis exam consolidation

    Practise precipitation titrations, gravimetric analysis and structure questions from the available paper.

  5. Week 5
    Mixed Chemistry exam practice

    Work through selected buffer, enthalpy, organic, solubility and calculation questions.

  6. Week 6
    Planning Chemistry responses

    Review selected paper questions and practise specific explanations, equations and response planning.

  7. Week 7
    Chemistry exam technique

    Combine final question practice with time management, planning and avoiding common mistakes.

A weekly class.
Support around it.

Choose your year, find a time and try a lesson.

Year 12 Chemistry

$60/ hour

$120 per week

  • Includes a two-hour class
  • Homework with step-by-step solutions for every question
  • Help with any extra questions you have
  • Exam and depth study preparation
Find a Year 12 class

Currently listed classes are below. Contact us to confirm a time for the incoming accelerated or normal intake.

Class timetable

Find your class.

Why not try a class - it's risk free!

The first lesson is only charged if you want to continue, otherwise it's totally free!

FAQ

Can I join online Chemistry tutoring from Sydney or outside Sydney?

Yes. Our Chemistry tutoring is online over Zoom, welcoming Year 11 and Year 12 HSC students from Sydney, regional NSW and elsewhere in Australia. Small-group lessons include exam-style homework, worked solutions and 1-to-1 tutor support. If you study a different curriculum, contact us with your topics to check whether the NSW HSC course suits your needs.

How does a Chemistry tutor help me improve my exam answers?

There's 2 important prongs: 1. Learning the content well and 2. Practice. First, we teach you what’s happening in the reaction so you can explain why it happens and work out which calculation to use when the question changes.

Then you practise HSC-style questions in class. We also review real student responses together, especially in Trial exam and HSC preparation classes.

Do I need to be good at Maths to do Chemistry?

You will use ratios, rearranging equations and scientific notation. We connect each calculation to the chemistry behind it, so you can see what the numbers represent.

What if my school teaches the topics in a different order?

Bring your assessment schedule. We can compare it with the class plan and discuss support for the topics you need sooner.

Can I join after the course has started?

Tell us your year, the topics you have covered and where you feel stuck. We’ll help you find a suitable class and discuss any catching up before you enrol.

Can I ask questions outside class?

Yes. Bring the question and your working to your tutor. The 1-to-1 support is there to help you work through the step or idea that has not clicked yet.

What happens when I book a trial?

Send us your year, subject and preferred class. We’ll help you find a suitable lesson. The first lesson is only charged if you want to continue, otherwise it's totally free!

Group lessons don't work for my child. They're too shy to ask questions.

I was always that shy boy. I was scared to ask questions - I was scared of what other people would think.

  • Students can ask questions 1-1 after class, or between classes via email/text.
  • I ask every student questions during class – so everyone is forced to interact.
  • I monitor every student to see if they’re falling behind.

If you definitely need a 1-1 setting, then you should hire someone else.

But, is the setting more important to you, than your child getting an expert? There’s a lot of tutors out there. But how many of them have topped NSW? Not all of them know chemical equilibrium and electromagnetism like I do. Or how to explain it to get the "Aha!" moment. Or why students lose marks. Or how to fix it. And that means they won't produce results, like helping Kirsten Chu, 2022, move from 56% to 91%.

Can my child catchup to the group pace?

No one wants to be in an environment where they're far behind everyone else. To help you judge if it's suitable, the average student we get comes in with marks at, or a bit below average. We get a mix of selective (NSB, NSG, Ruse etc), private (Scots, St Patricks, Meriden etc) and comprehensive schools (Castle Hill, Carlingford HS etc). We help them catchup by answering questions after class and providing support material for previous topics.

In class when we go through a new topic, we will always explain it from scratch - so even if you have missed out on previous concepts, it won't stop you from getting the new ones.

But what if my child has questions?

Our group is run differently to most tutors. I am willing to spend 1-1 time with you. If you have questions – you can ask me 1-1 after class! And throughout the week! I’ll spend an hour with you if you need it.

How do your classes work?

We have one 2 hour session per week. It's online, via Zoom.

What do you do in class?

We start the lesson with a 10 min quiz. Then we go through a new concept and then do a few questions to solidfy it. Then we repeat this for the whole lesson. When exam time comes, we do revision lessons where a practice exam is sent before class, and the hard questions students request are reviewed in class.

How does payment work?

We accept payment via Bank Transfer. We typically bill termly. If you wish to discontinue, all unused lessons will be refunded, in full, to you.

What if I miss a lesson?

We highly recommend not to skip lessons for exams - if you are pressed for time, it is best if you skip the homework but come anyway. If you are away for a lesson, all materials will be provided and a recording will be made for you, however, the lesson will not be refunded.

Do you have other class times?
Do you have classes in the holidays?

Yes - classes run as per usual. It's as if the holidays do not exist. But we do not run intensive lessons in the holidays as they are ineffective for students.

Group size

It varies, but often hovers around 5

What do students need to join online?

Enthusiasm, pen, and preferably a dedicated book. All other resources will be sent.

How do you prepare students for School Exams?

The major reason why students do not do well in their exams is because they lack knowledge of the core concepts. After doing content with us, most students do not experience this anymore. From this strong foundation, we do weekly exam style problems in the homework - meaning weekly practice for exams.

Just before exams, we will also give access to our private collection of school past papers which is the best practice. We will also go through exam technique in class before exams.

When will you finish the syllabus?

In the accelerated classes, we usually finish the entire syllabus 1 term before trials (final Year 12 exams in Term 3 Week 2). This gives us ~7 weeks of revision before trials. We will then have ~10 weeks of revision after Trials for the HSC. We will revise each module with a weekly exam on that module, and then do mock papers.

In School Paced classes, we match school - so we have around 6 weeks of revision for HSC.

What order do you cover the syllabus content in?

Module 1, 2, 3, 4, 5, 6, 7, 8.

But that order isn't what my school is doing!

Some schools do decide to do it out of order. In my experience, this is ok because the same content is covered by the time you sit the exam. The most important factor is that the student learns something - even if it's not synchronised with school.

What is your typical student like?

Our students typically come with marks at, or a bit below average. We get a mix of selective (NSB, NSG, Ruse etc), private (Scots, St Patricks, Meriden etc) and comprehensive schools (Castle Hill, Carlingford HS etc).

What does a good candidate for your program look like?

Your improvement does not depend on how smart you are. The most important quality that determines success in the program is your willingness to work. Students that have shown dramatic improvements like Jade Yang and Kirsten Chu put in 10h+ per week into Physics and Chemistry. We make it easy for you - as long as you do all the homework (exam practice) and come to every class, you will improve.

The question is - will you do it?

Do you offer online Physics and Chemistry tutoring?

Yes. Our online Physics tutoring and Chemistry tutoring are small-group classes for Year 11 and Year 12 students studying the NSW HSC. Physics is sometimes shortened to ‘phys’, but the course is the same HSC Physics subject. Lessons take place on Zoom, with exam-style homework, worked solutions and 1-to-1 tutor support between classes.

Explore Physics tutoring or Chemistry tutoring to see the courses, or check prices and class times.

Can I join from Sydney, regional NSW or outside NSW?

Yes. Classes are online, so you can join from Sydney, Newcastle, Wollongong, regional NSW or elsewhere in Australia. You do not need to travel to a tutoring centre.

The Physics and Chemistry courses are designed for the NSW HSC. If you study another state's syllabus or a different curriculum, contact us with your year and topics so we can discuss whether the course is suitable. Online access does not mean every curriculum is covered.

Still have a question?

Call 0490 496 078